The Mitsubishi Fuso Canter is a line of light-duty commercial vehicle manufactured by Mitsubishi Fuso Truck and Bus Corporation since 1963. The range is currently marketed in Japan, Europe, Australia, New Zealand, Indonesia, Iran and a number of other Asian countries, as well as in the United States. The same range has been marketed by Mitsubishi Fuso Truck of America in North America since 1985, though it was called the FE model rather than the Canter until the 2012 model year. The Canter is named after the English word describing the gait of a horse, emphasising the ‘thoroughbred’ nature of Mitsubishi trucks.
Asia’s largest trade fair for automotive parts, accessories, equipment and services
Big plans are underway for the next Automechanika Shanghai, scheduled for 29 November – 2 December 2017. Each year, the show continues to expand with the scale, exhibitor and visitor figures increasing.
Held at the National Exhibition and Convention Center in Puxi, Shanghai, the exhibition space will climb to 340,000 sqm this year. Approximately 6,000 exhibitors from 40 countries and regions are expected to attend this year. The number of visitors attending the show is expected to see an increase, with 130,000 from 140 countries and regions.
1.Experienced Mold Building Technology:
AsOne ‘s key advantage in producing for the high-end market is our well-trained team of experienced mold building and tooling calibration technicians.
2.Advanced Shearing Equipment:
We cut our own steel and inspect and manage inventory to make sure that the best quality material is being used on a First-in First-out system for productions. Our in-house coil cutting machine provides the best-protected material for press process to reduce appearance defects.
3.Automated Press Lines:
In addition to fit, appearance is also an important aspect of a replacement auto part. In-house press machines reduce the possibility of defects due to dust.
4.Innovation of fixtures checking:
Our company stands out as an innovator and early adopter of increasingly strict standards.We are the first to develop and utilize checking fixtures with an enhanced striker checking mechanism.
5.Strict Quality Control:
Before mass production begins, sample lots are run and inspected for fit and appearance to insure that all subsequent products will be of high quality.
6.In-home E.D.P System:
AsOne own pollution-free electro-deposition painting (EDP) system. After assembly, the high efficiency EDP coating system using PPG paint, is applied to every part to provide an extra layer of quality rust-proofing to meet high-end market needs.
The Isuzu Forward (Japanese: いすゞ・フォワード) (also known as the Isuzu F-Series) is a line of medium-duty commercial vehicles manufactured by Isuzu since 1970. All F-series trucks are cab over designs and the cabin comes fully built from the factory. Most models come with a diesel engine; but, some markets get CNG derivatives as well. The F-series is available a variety of cab styles, engines, 4WD or 2WD depending on the market it is sold. Most trucks are assembled in Japan; however, they are locally assembled from CKD kits in some countries.
Most mid-size and big-size models of the truck are distinguishable by a front ‘Forward’ badge; but the common Isuzu badge is usually used on the rear.
The Isuzu Forward is among the commercial grade trucks used by the Japan Ground Self-Defense Force for rear line duties.
In the United States, its principal competitors are Bering MD, Chevrolet W-Series, GMC W-Series, Mitsubishi Fuso FK and the UD 2000/2300. In Japan, its main competitors are Mitsubishi Fuso Fighter, Nissan Diesel/UD Trucks Condor, Hino Ranger.
For the Chilean and Peruvian markets, the trucks were shipped from Japan as CKD kits to Huechuraba, Chile, where up to 2 a day can be assembled by a team of 13 workers. They were badged as Chevrolets, and GMCs until 2009. On June 10, 2008, GM Chile announced its 20,000th Isuzu truck assembled in its Huechuraba plant (including N and F series).
The Isuzu Elf (Japanese: いすゞ・エルフ) is a medium duty truck produced by Isuzu since 1959. Outside Japan it is known as N-series. The range was originally mainly available in Japan and other Asian countries. Australia was another important market for the Elf and N-Series – to the extent that it was manufactured there from the 1970s using many local components. Since the early 1980s, it has also been sold and built in the United States (under the Chevrolet and GMC brand as a W-Series), and also as the Isuzu N-series. North America only receives the wide-cab version.
For the common Andinian market (including Chile and Peru), the truck has been assembled in the GM-Colmotores assembling plant in Bogotá, Colombia since 1991, with annual quantities already of 20,000 up to 60,000 units. Local assembly has been increasing because of increasing demand in the Colombian and neighboring markets. It carries “Tecnología Isuzu” (with Isuzu Technology) lettering.
In Indonesia, Philippines and several other countries, the Elf is not only used as trucks, but also converted into microbuses by local body makers. The lighter four-wheeled models are commonly used as an intercity Angkot (share taxi), as a school bus, or as an employee bus.
The fifth generation Isuzu Elf appeared in July 1993, with more sculpted headlights. The 2.8 4JB1 and 4JB1T are standard on both Elf 150 10 ft/14 ft. and Elf 250 along with 3.6 4BE1. The non turbo 4JB1 features a new VE Rotary injection pump which increase power to 90ps and euro emission. In May 1995 it received a minor change, including upgraded, cleaner diesel engines.The H series 4.0-liter 4HE1 and 4.3-liter 4HF1. The 16 ft. Chassis with H series engine are standard while the 14 ft. Version are still in production. OEM deal with Nissan led to the Elf also being sold badged as a Nissan Atlas and a Nissan Diesel Condor 20/30/35 beginning at this time, followed by the Nissan Atlas Max from 1996 until 2000. The Atlas Max was based on the new, lighter duty Elf 100 (June 1995) which was available with a 2-liter petrol or a 2.5 or 2.7-liter diesel engine.
In the U.S. the elf was marketed as the Isuzu NPR and Chevrolet/GMC W-series, each available with either the 4HE1 4.8-liter turbocharged diesel engine or GM’s L31 Vortec 5.7-liter gas engine and 4L80-E Automatic Transmission. The gas engine produced 275 hp (205 kW) to 325 hp (242 kW) at 4600 rpm and 330 lb·ft (447 N·m) to 350 lb·ft (475 N·m) of torque at 2800 rpm.
In May 2004, subsequent to a few minor changes, the Elf underwent a more major facelifts with new, larger, trapezoidal headlamps. Another OEM deal was forged at this time and the Elf was now also marketed as a Mazda Titan in parallel.
In Malaysia, this truck is manufactured by Heavy Industries Corporation of Malaysia (Isuzu HICOM Malaysia) under the name of HICOM Perkasa, but carrying the Isuzu N-Series Commando badge.
The sixth generation Elf/N-series was released in December 2006 (High Cab and Wide Cab) and February 2007 (Regular Cab). By the time the full range was available, the fifth generation Elf was retired. This was also assembled in Colombia (alongside the heavier F-series), where it was sold as the Chevrolet NKR, NPR, or NQR. GM began assembling Isuzu trucks in Chile in 1984. The headlight-turnsignal cluster is now configured in the shape of the Isuzu “twin bar” logo, which was used from 1974-1991. In North America, GM sold the Isuzu N-Series as the Chevrolet and GMC W-Series until 2009. In 2016, it reintroduced the model as the Low Cab Forward (LCF) series, named simply the Chevrolet 3500, 4500, or 5500, and available with the same gasoline or diesel engines.
The design of the 6th-generation Isuzu Elf cabin bears some resemblance to an all-fiberglass cabin fitted to trucks made by the Brazilian company Agrale since 2003. Agrale introduced an all-steel Chinese copy of the Isuzu wide cab to its truck range in late 2015, but the fiberglass cab was not phased out.
The automotive aftermarket is the secondary market of the automotive industry, concerned with the manufacturing, remanufacturing, distribution, retailing, and installation of all vehicle parts, chemicals, equipment, and accessories, after the sale of the automobile by the original equipment manufacturer (OEM) to the consumer. The parts, accessories, etc. for sale may or may not be manufactured by the OEM. According to a report by the International Trade Administration in the Department of Commerce, “Aftermarket parts are divided into two categories: replacement parts and accessories. Replacement parts are automotive parts built or remanufactured to replace OE parts as they become worn or damaged. Accessories are parts made for comfort, convenience, performance, safety, or customization, and are designed for add-on after the original sale of the motor vehicle.
The aftermarket encompasses parts for replacement, collision, appearance, and performance, including electric propulsion. The aftermarket provides a wide variety of parts of varying qualities and prices for nearly all vehicle makes and models.
Consumers have the option of repairing their vehicles themselves or can take the vehicle to a professional repair facility. The aftermarket helps keep vehicles on the road by providing consumers the choice of where they want their vehicles serviced, maintained, or customized.